Bass Update #7
So I gave the neck another coat of epoxy. The second coat went on perfect, and there were little to no bubbles or marks along the entire fingerboard. I checked back this morning and saw two spots that will need some sanding- but it looks awesome. I just have to wait for the epoxy to cure after 72 hours.
So... I attempted to stain the body and made a mess. The yellow color of the bass body did not mix well with the dark stain. After trying a few things I eventually coated the thing, and it looked really good on the back side... but the front side did not look good at all. And then I accidentally spilled paint thinner all over it. So... I'm going to resand it, and then paint it a solid color.
I think that's all I'll be able to do for a long time. I'm putting this project on the shelf for a while.
Saturday, March 21, 2009
Friday, March 20, 2009
Bass Update #6
Bass Update #6
So applying epoxy isn't as easy as I thought. The 2 part crystal clear epoxy will harden to a glass like finish- which is awesome on a fretless fingerboard. It prevents string wear, and adds its own tone to the mix. Jaco Pastorious, according to legend, pried the frets off his bass and coated the neck in epoxy. Without the thick layer of epoxy, the roundwound strings would eat through the fingerboard and cause all sorts of problems later on. I join the ranks of 500 bored teenagers that have taken apart their guitars in the name of science.
Problems can mess it all up though. I combined the two parts and mixed it too much... causing microscopic bubbles to develop. I then brushed it on too thin... and didn't blow out the bubbles like I was supposed to. The result was a glassy surface that looked like the craters of the moon. I had to sand it off and start all over again.
This time I mixed it better, there were only a few bubbles. I then poured it on thick and smoothed it out with a sponge brush. The epoxy evened itself out and there were few bubbles to be seen. I checked the surface with light and saw that there were a few tiny dust particles that show up here and there on the neck. When the epoxy hardens in a couple days, I'll wet sand some of the rough spots and give it another coat. I think two coats will do the job.
Sticky stuff. I'm not sure how the professionals do it. HG Thor Guitar Lab specializes in fretless neck epoxy coatings. They create a crystal clear job that looks awesome from the pictures I've seen. I'm not aiming for a super professional job, I just want something that looks neat and sounds awesome. The cure time is 72 hours... so I'm going to wait and then sand and recoat. Then wait another 72 hours, and then sand and buff.
It doesn't look like staining will work... so I'm thinking of a solid color.
So applying epoxy isn't as easy as I thought. The 2 part crystal clear epoxy will harden to a glass like finish- which is awesome on a fretless fingerboard. It prevents string wear, and adds its own tone to the mix. Jaco Pastorious, according to legend, pried the frets off his bass and coated the neck in epoxy. Without the thick layer of epoxy, the roundwound strings would eat through the fingerboard and cause all sorts of problems later on. I join the ranks of 500 bored teenagers that have taken apart their guitars in the name of science.
Problems can mess it all up though. I combined the two parts and mixed it too much... causing microscopic bubbles to develop. I then brushed it on too thin... and didn't blow out the bubbles like I was supposed to. The result was a glassy surface that looked like the craters of the moon. I had to sand it off and start all over again.
This time I mixed it better, there were only a few bubbles. I then poured it on thick and smoothed it out with a sponge brush. The epoxy evened itself out and there were few bubbles to be seen. I checked the surface with light and saw that there were a few tiny dust particles that show up here and there on the neck. When the epoxy hardens in a couple days, I'll wet sand some of the rough spots and give it another coat. I think two coats will do the job.
Sticky stuff. I'm not sure how the professionals do it. HG Thor Guitar Lab specializes in fretless neck epoxy coatings. They create a crystal clear job that looks awesome from the pictures I've seen. I'm not aiming for a super professional job, I just want something that looks neat and sounds awesome. The cure time is 72 hours... so I'm going to wait and then sand and recoat. Then wait another 72 hours, and then sand and buff.
It doesn't look like staining will work... so I'm thinking of a solid color.
Wednesday, March 18, 2009
Bass Update #5
Bass Update #5:
There isn't much left to do before I repaint this thing. I had to take care of some screw holes in the body though.
I filled in the pickguard screw holes and tuner screw holes with toothpicks and wood glue.
After the glue dried I cut the toothpicks flush to the rest of the body and headstock and sanded it down. No more holes. There's some more final sanding I need to do to the body before I try to color the wood. I hate sanding. The reshaped headstock gives the old neck a new look. The neck will be coated with an epoxy to protect the fingerboard.
this just in:
Monday, March 16, 2009
NOTTBLOCK
Everyone subscribe to NOTTBLOCK on iTunes!
I was lucky enough to submit some original music for this project by the Nott Brothers & Co. I think they're hilarious, and they've put an incredible amount of effort into this (I think).
Even though my part was minimal at best, take some time out of your busy day to watch it.
you can also watch the series on youtube: http://www.youtube.com/nottblock
I was lucky enough to submit some original music for this project by the Nott Brothers & Co. I think they're hilarious, and they've put an incredible amount of effort into this (I think).
Even though my part was minimal at best, take some time out of your busy day to watch it.
you can also watch the series on youtube: http://www.youtube.com/nottblock
Friday, March 13, 2009
Bass Update #4

I am not an expert with electronics. I tend to burn myself with the soldering iron. I need a new volume pot.... or not (I think I have one laying around somewhere). This bass has one of the simplest wiring configuration of any instrument, and yet I am confused. All I really have to do is reconnect the volume pot and the output, but even that has me scratching my head.
I wanted new pickups, but I'm going to see how the old ones sound. They were seriously only used for like 5 years before sitting in the closet for an equal amount of time. They should sound great.
Yes. This is boring. I don't give a crap.
Bass Update #3
Bass Update#3
Haven't really done much on the bass body. I've sanded it down to a reasonable level, but I'm still not satisfied with some of the curves, and I'm too afraid to make a drastic decision right now. I still need to round it out some more.
I did end up defretting the neck (but forgot to take pictures). Defretting can be difficult business. Tearing out the fret wire can chew up the neck, and cause lots of wood pullout. Standard procedure for a defret is to heat up the fret with a soldering iron and gently wedge the end of a knife or some pliers under the wire itself. I used a soldering iron for the first few frets, but found that they weren't entirely snug in their slots to begin with. I slipped the edge of the blade under the wire and carefully wiggled them free. I had a few chips from pullout, but I quickly super glued them down. I was finished in about half an hour because the frets came out really easy.
Normally you would then clean out and fill the empty fret slots with thin wood veneer, gluing them in place. I opted for the quicker wood filler method. You have to fill the slots with a filler that won't shrink or expand in heat or humidity. It isn't as clean as the other method, but I didn't really care anyway. After the wood filler dried overnight, I sanded everything flush with different grades of sandpaper. I wanted to match the color of the Maple, but when it dried it looked a slight shade lighter. The lines look good. The next step is to coat the fingerboard with clear epoxy to prevent string wear and provide a hardened surface. I don't know when I'll get around to that step.
It was easy.
Haven't really done much on the bass body. I've sanded it down to a reasonable level, but I'm still not satisfied with some of the curves, and I'm too afraid to make a drastic decision right now. I still need to round it out some more.
I did end up defretting the neck (but forgot to take pictures). Defretting can be difficult business. Tearing out the fret wire can chew up the neck, and cause lots of wood pullout. Standard procedure for a defret is to heat up the fret with a soldering iron and gently wedge the end of a knife or some pliers under the wire itself. I used a soldering iron for the first few frets, but found that they weren't entirely snug in their slots to begin with. I slipped the edge of the blade under the wire and carefully wiggled them free. I had a few chips from pullout, but I quickly super glued them down. I was finished in about half an hour because the frets came out really easy.
Normally you would then clean out and fill the empty fret slots with thin wood veneer, gluing them in place. I opted for the quicker wood filler method. You have to fill the slots with a filler that won't shrink or expand in heat or humidity. It isn't as clean as the other method, but I didn't really care anyway. After the wood filler dried overnight, I sanded everything flush with different grades of sandpaper. I wanted to match the color of the Maple, but when it dried it looked a slight shade lighter. The lines look good. The next step is to coat the fingerboard with clear epoxy to prevent string wear and provide a hardened surface. I don't know when I'll get around to that step.
It was easy.
Wednesday, March 11, 2009
me vs. garit's IM #2
me: dude. Sent at 1:38 PM on Wednesday
me: dude?
duuuuude.
DUde.
dUde?
dude.
dude.
duuuuuuuuuuuuuuuuude.
dddddddude
dudeeee
dude
Sent at 1:52 PM on Wednesday
me: dude.
d u d e
Sent at 1:54 PM on Wednesday
me: dude
dude?!
duuuuude Sent at 1:58 PM on Wednesday
me: dude?
DUDE!!
d.........ude?
dude.
dude.... dude!
Sent at 2:00 PM on Wednesday
me: du.....uuuuu.....de?
dude!
dude.
dude
duuuuude.
Sent at 2:13 PM on Wednesday
if you write a word over and over it seems to lose its meaning completely.
me: dude?
duuuuude.
DUde.
dUde?
dude.
dude.
duuuuuuuuuuuuuuuuude.
dddddddude
dudeeee
dude
Sent at 1:52 PM on Wednesday
me: dude.
d u d e
Sent at 1:54 PM on Wednesday
me: dude
dude?!
duuuuude Sent at 1:58 PM on Wednesday
me: dude?
DUDE!!
d.........ude?
dude.
dude.... dude!
Sent at 2:00 PM on Wednesday
me: du.....uuuuu.....de?
dude!
dude.
dude
duuuuude.
Sent at 2:13 PM on Wednesday
if you write a word over and over it seems to lose its meaning completely.
Subscribe to:
Posts (Atom)


